DETERMINING MODEL CONFIGURATION FOR THERMAL SIMULATION OF URBAN MOSQUE FAÇADE DESIGN

Authors

  • Noor Hanita Abdul Majid Kulliyyah of Architecture and Environmental Design INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA
  • Fauziah Hanum Abdullah Kulliyyah of Architecture and Environmental Design INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA
  • Zuraini Denan Kulliyyah of Architecture and Environmental Design INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA

DOI:

https://doi.org/10.21837/pm.v16i5.437

Keywords:

urban mosque, baseline model, thermal simulation, form layout and volume

Abstract

Urban mosque (UM) faqade design, besides its aesthetical role, is a passive architectural design strategy in handling how much heat penetrates into the internal spaces. In determining the model configuration for thermal simulation of urban mosque faqade, the orientation and massing of the UM is tested. The orientation of UM relates to the qiblat direction and sun exposure. On the other hand, the massing is defined by the volume of the UM. This research investigates the effects of form layout and volume on thermal performance of the interior environment. A model with no openings on north-westward faqade (NWF) and south-eastward faqade (SEF) is simulated for a baseline scenario for comparison purposes. Autodesk Ecotect Analysis 2011 is a computer-based simulation tool used in this research to measure the thermal analysis in the UM model. The results indicate the performance of different types of forms, layouts and volumes. By the end of this study, the configuration of the base model is determined according to the results of the orientation and volume variations.

Downloads

Download data is not yet available.

References

Adunola, A. O. (2012, April). Urban residential comfort in relation to indoor and outdoor air temperatures in Ibadan, Nigeria. In 7th Windsor Conference: The changing context of comfort in an unpredictable world Cumberland Lodge, Windsor, UK. April 12-15, 2012. Windsor, United Kingdom.

Al-Homoud, M. S. (1999). Thermal design optimization of mosques in Saudi Arabia. In Proceedings of the International Symposium on Mosque Architecture (pp. 15-30). Retrieved 31 August, 2017 from http://faculty.kfupm.edu.sa/ARE/ alhomoud/Publications/Mosque_Architecture_Symposium_99.pdf.

Al-Obaidi, M. A. A. H., & Woods, P. (2006). Investigations on effect of the orientation on thermal comfort in terraced housing in Malaysia. International Journal of Low Carbon Technologies, 1(2), 167-176.

Al-Tamimi, N. A. M., & Sharifah Fairuz, S. F. (2011). Thermal performance analysis for ventilated and unventilated glazed rooms in Malaysia (Comparing simulated and field data). Indoor and Built Environment, 20(5), 534-542.

Al-Tamimi, N. A. M., Sharifah Fairuz, S. F., & Wan Mariah, W. H. (2011). The effects of orientation, ventilation, and varied WWR on the thermal performance of residential rooms in the tropics. Journal of Sustainable Development, 4(2), 142149.

Crawley, D. B., Hand, J. W., Kummert, M., & Griffith, B. T. (2008). Contrasting the capabilities of building energy performance simulation programs. Building and Environment, 43(4), 661-673.

Department of Standards Malaysia (2014a). MS1525:2014. Malaysia standard: Code of practice on energy efficiency and use of renewable energy for non-residential buildings (Second Revision).

Department of Standards Malaysia (2014b). MS2577:2014. Malaysian standard architecture and asset management of masjid - Code of practice.

EnergyPlus (2016). Weather data by location. All regions-Southwest Pacific WMO Region 5-Malaysia. Weather data download-Kuala Lumpur 486470 (IWEC). Retrieved August 13, 2016 from https://energyplus.net/weather-location/southwest pacific wmo region 5/MYS//MYS Kuala.Lumpur.486470 IWEC

Hussin, A., Salleh, E., Chan, H. Y., & Mat, S. (2014). Thermal comfort during daily prayer times in an air-conditioned mosque in Malaysia. Proceedings of 8th Windsor Conference: Counting the Cost of Comfort in a Changing World, (April), 10-13.

ISO 8995 (2002). International Standard ISO 8995 - Lighting of indoor work places (Second edition 2002-05-15). Geneva: International Organization for Standardization.

Jusuf, S. K., Wong, N.H., Hagen, E., Anggoro, R., & Hong, Y. (2007). The influence of land use on the urban heat island in Singapore. Habitat International, 31(2), 232242.

Liping, W., & Hien, W. N. (2006, September). The impact of facade designs : Orientations , window to wall ratios and shading devices on indoor environment for naturally ventilated residential buildings in Singapore. PLEA2006 The 23rd Conference on Passive and Low Energy Architecture. September 6-8, 2006, Geneva, Switzerland.

Marzita, P., Mohd Hairy, I., Mazlini, A., Che Nidzam, C. A., & Noraini, M. N. (2012). Thermal comfort in classroom: Constraints and issues. Procedia - Social and Behavioral Sciences, 46, 1834-1838.

SASO (2009). SAUDI STANDARD DRAFT NO: 4520. Code for Lighting of Indoor Work Places. Saudi Arabian Standards Organization (SASO).

Shafizal, M. (2014). Roof designs and affecting thermal comfort factors in a typical naturally ventilated Malaysian mosque (Doctorate dissertation). Cardiff University, Wales.

Downloads

Published

2018-07-25

How to Cite

Abdul Majid, N. H., Abdullah, F. H., & Denan, Z. (2018). DETERMINING MODEL CONFIGURATION FOR THERMAL SIMULATION OF URBAN MOSQUE FAÇADE DESIGN. PLANNING MALAYSIA, 16(5). https://doi.org/10.21837/pm.v16i5.437

Most read articles by the same author(s)